Close
Latex 6500 7L
Latex 6500 (7L)

8500/6500 MORTAR AND LATEX OPTIMAL PERFORMANCE FLEXIBILITY A quality mortar must have certain characteristics. It must, among other things, provide very good performances in terms of adhesion, strength and flexibility. This flexibility will allow the mortar to resist freeze/thaw cycles. Combined use of 8500 and 6500 latex provides greater flexibility for outdoor installations. A flexible mortar also responds better to the stress created by the on/off cycles of thermostats when installed on in-floor heating. It also needs to be resistant to impact and vibration. This polymer-renforced mortar is suitable for residential, light commercial and heavy commercial use. It has a shear strenght of 525 psi (porcelain on porcelain) and meets or exceeds ANSI A118.4 and A118.11. The combined use of 8500 and 6500 latex therefore offers the best possible guarantee on in-floor heating. OUT DOOR INSTALLATION First, it is very important to specify that for outdoor installations, TTMAC standards state that the temperature must reach a minimum of 12°C* throughout the whole curing period of 28 days. In addition, during hot summer days, it is best not to do an installation when the sun is shining directly on the mortar. The mortar will dry faster on the surface, decreasing open drying time, which could limit its adhesion.

Latex 6500 7L

Latex 6500 (7L)

8500/6500 MORTAR AND LATEX OPTIMAL PERFORMANCE FLEXIBILITY A quality mortar must have certain characteristics. It must, among other things, provide very good performances in terms of adhesion, strength and flexibility. This flexibility will allow the mortar to resist freeze/thaw cycles. Combined use of 8500 and 6500 latex provides greater flexibility for outdoor installations. A flexible mortar also responds better to the stress created by the on/off cycles of thermostats when installed on in-floor heating. It also needs to be resistant to impact and vibration. This polymer-renforced mortar is suitable for residential, light commercial and heavy commercial use. It has a shear strenght of 525 psi (porcelain on porcelain) and meets or exceeds ANSI A118.4 and A118.11. The combined use of 8500 and 6500 latex therefore offers the best possible guarantee on in-floor heating. OUT DOOR INSTALLATION First, it is very important to specify that for outdoor installations, TTMAC standards state that the temperature must reach a minimum of 12°C* throughout the whole curing period of 28 days. In addition, during hot summer days, it is best not to do an installation when the sun is shining directly on the mortar. The mortar will dry faster on the surface, decreasing open drying time, which could limit its adhesion.
$87.01 /Each
PRFLATEX650007L00000

Technical Information

Product Code
PRFLATEX650007L00000
PRODUCT SHEET
PRODUCT TYPE
Vinyl and Tile
CATEGORY
Mortars and adhesives
SUBCATEGORY
Liquid latex

Use these details to plan your order with success

Units Quantities Lbs
Each 1.00 16.00
Carton 2.00 32.00
Skid 48.00 768.00